|E-HC/bC||Incorrect header block (CRC-16)||The software seems
damaged while you receive from web site or e-mail.
Pls receive the software again and try to download.
|E-dC||Incorrect data block (CRC-16)||The software seems damaged while you receive from web site or e-mail. Pls receive the software again and try to download.|
|E-Hn/bF||Invalid HDF version||This error can be occured when you attempt to download Non-Superset STB software to Superset or Vice-Versa. Pls check the STB model and the software.|
|E-Id||Invalid system ID||This error can be occured when you attempt to download F1 software to F1-CI. Pls check the STB model and the software.|
|E-AC||Incorrect application (CRC-32)||Download latest version of application S/W.|
|E-ut||UART RX/TX time out||There is communication
problem between source and target.
1) Check whether the S/W is compressed or not and Check whether you use the proper download tool for the software.
2) Reduce the download speed and try to download again.
3) STB main power Off/On and try to download again.
4) Reset the PC and try to download again.
|E-Ad||Invalid address||Humax made the hdf file with wrong address. Pls notify this error to us and wait until we release the proper software.|
|E-Ao||Invalid offset address for upload (Odd offset)||There was a mistake when we made hdf file from binary file. Pls let us know immediately and wait new release version.|
|E-Ft||Flash program time out||The flash memory in STB seems damaged. Pls try to download one more time. If you fail agian, send us back to replace the flash memory device.|
|E-It/Et||EEPROM program time out||The EEPROM in STB seems
damaged. Pls try to download one more time.
If you fail again, replace the EEPROM device.
|E-FE||Fail compare after flash write||Flash memory is damaged. Return the main board (CPU Board).|
|E-HF||Invalid HDF Format||Humax made the hdf file with wrong version. Pls notify this error to us and wait until we release proper software.|
|E-Fn||Invalid flash device||Flash memory is defected Need to change the flash memory so Pls return the Main Board.|
|E-AS||Incorrect application size||Check the software version and STB hardware specification.|
|E-IC||This error is very similar to E-AC||Download latest version of application S/W.|