hier kun je easy connect downloaden (dat is het setup tooltje dat ook op de cd staat):
h**p://www.linksys.com/servlet/Satellite?c=L_CASupport_C1&childpagename=US/Layout&cid=1166859678292&pagename=Linksys/Common/VisitorWrapper
hier staat support:
h**p://www.linksys.com/servlet/Satellite?c=L_CASupport_C2&childpagename=US%2FLayout&cid=1166859878881&pagename=Linksys%2FCommon%2FVisitorWrapper&lid=7888119492B23
dit is het wachtwoord: admin (laat username leeg en vul bij wachtwoord admin in)
The first time you open the Web-Based Utility, use the default password admin. (You can
set a new password from the Administration tab’s Management screen.)
een reset geef je zo:
Reset the Router to factory default by pressing the Reset button for 10 seconds and then releasing it. If
you are still getting prompted for a password when saving settings, then perform the following steps:
1. Access the Router’s web-based utility by going to
http://192.168.1.1 or the IP address of the Router.
Enter the default password admin, and click the Administrations => Management tab.
2. Enter a different password in the Router Password field, and enter the same password in the second
field to confirm the password.
3. Click the Save Settings button.
groet,
Arthur