SAB TITAN II HD Combo Software laden met een USB stick

 

 

 

1ste  Download de laatste software voor de SAB TITAN II COMBO

         bv de : ALI3602_06000400_sab_300_ps_xwindow_1.3.47.abs .

 

2de  Zet deze file op een usb stick

 

3de  Ga in het menu naar SYSTEM daar vindt je UPDATE BIJ USB druk daar op

 

 1

 

2

4de  Kies de FILE  -dan naar UPDATE MODE

 

3

           

Selecteer al software en kanalenlijst daarna ga je naar start

 

 4

 

De software wordt geladen en de reciever wordt herstart.

 

5

 

INTERN SHARE

 

How to initiate Homesharing with the SAB Titan Receivers?

You can share your Smartcard in your home with several SAB Titan receivers via internet cable. We advise to use 1 smartcard with three receivers (1 master receiver and two other receivers).

you will be able to watch the channels you want with each receiver with the homeshare function.

Satellite signal cables are needed for each receiver. Or else it’s not possible to have a homeshare function with the SAB Titan and SAB Ultimate receivers.

Setting of the Master receiver

1.       Press the menu button en choose the Internet menu

2.        Choose Homeshare Setting

3.    Choose HomecamD function

4.    Mark your Server IP number. This is the IP number of your Master Receiver. Use this IP number for your Client receiver. Enter the HomecamD port with in the Server Port menu (between 1-65536)

5.    Press the OK button to activate HomecamD ( you will see the green ball next to the menu)

6.    Choose HomecamD 1.0

7.    You can now verifiy the changes you made with the verify button. Master settings are ready settings of the client receiver

8.    Press Menu en choose Internet function

9.    Choose Server Settings

10.  Press the yellow button to submit

11.  Enter your IP number of the Master receiver into the Server Name menu with the OK button. After that press the red button to verify.

12.  Enter the Port of the Master receiver into the Server Port Menu

13.  If you want to use Homesharing, press the OK button in the Active Server Menu. ( you will see the green ball next to the menu)

14.  Choose HomecamD 1.0 In the Emulator Menu

15. You can now update the changes you made with the red button

16.  Your receiver will connect to the master receiver. If you see Connect Ok Working, the homesharing is successfull. After that you will see CW OK.

 

The receivers are now successfully connected to eachother. You can exit with the Exit button.

Cccam laten werken

 

Download de  hs.cfg file : http://www.dvbstand.com/swd.php?id=844&mark=1

Pak deze uit in een folder

Open de File hsdata.cfg met DCC je ziet dan

#    hsdata.cfg

#    need copy this file to C: of ur usb stick. then put receiver to read

#    cmd ->   cfg~lock~hide~pass

#    sample   cfg~1~1~00000000     means , u will lock the server info menu.

#    also hide the server info.  the password to watch is 00000000

#    cmd ->   protocol~host~port~user~pass~des

#    sample   newcamd~192.168.2.3~10000~dummy~dummy~0102030405060708091011121314                    #    sample   homecamd~192.168.2.3~10000

#    sample   homecamd2~192.168.2.3~10000

#    sample   cccamd~192.168.2.3~10000~dummy~dummy

#    sample   nasscamd~192.168.2.3~10000

  

cfg~0~0~00000000

cccamd~192.168.2.7~10000~dummy~dummy

 

WIJZIG DE CCAM REGEL EN SLAAT DEZE OP IN EEN USB STICK

 

PLAATS DE STICK IN DE RECIEVER EN GA NAAR MENU OP DE RECIEVER

 

6

 

Kies SERVER setting

 

7

 

Het volgende wordt zichtbaar druk op YES

 

8

  

De ccam wordt van de usb naar de reciever geschreven.

 

Herstart de reciever en je zou beeld moeten hebben

 

Deze handleiding is gemaakt en beschikbaar gesteld voor Luxsat

Thanks to tonto54